Jual Flow Meter Sensus WP Dynamic DN 50
Jual Flow Meter Sensus – The WP-Dynamic 50 °C is a bulk water meter for the measurement of high, relatively constant flow rates, e.g. behind pumps. It is available in sizes DN 40 to DN 400 Jual Flow Meter Sensus Wp Dynamics Applications Measurement of high, relatively constant flow rates, e.g. behind pumps For industrial, non-commercial use Application for aggressive media (BMF), e.g. – Desalinated / demineralized water – Caustic soda up to 20 % – Saline water up to 10 % – Chlorinated water up to 1 % – Glycol-water solutions up to 30 % – Caustic solutions up to ph value 9
Jual SENSUS WP-Dynamic DN 80 PN 16 130deg
Jual SENSUS HOT WATER WP-Dynamic DN 80 PN 16 130deg – Flow sensor for heat meters for commercial, and light industrial use DN 50 to 150 for customer billing, For measurement of hot process water up to 130 °C. For high permanent flow rates such as generated by pumps, as well as for the measurement of low flow rates in off-peak periods Installation in horizontal and vertical pipe lines The flow sensor WPD FS 130°C is used for measuring hot process water in heating systems with high relatively constant flow rates. Available in sizes DN 40 up to DN 300. Approved in DN 50 to DN 150 for customer billing acc. to 2014/32/EU MI004 Installation in vertical, horizontal or inclined pipes Available in short and long body lengths Can be equipped with up to three pulsers (1xOD, 2xRD) For measurement of hot process water up to 130 °C
Jual SENSUS Hot Water Meter – WS-Dynamic DN 50 PN 40 130deg
Jual SENSUS Hot Water Meter – WS-Dynamic DN 50 PN 40 130deg – Flow sensor for heat meters for commercial, and light industrial use DN 50 to 150 for customer billing, For measurement of hot process water up to 130 °C. For high permanent flow rates such as generated by pumps, as well as for the measurement of low flow rates in off-peak periods Installation in horizontal and vertical pipe lines The flow sensor WS Dynamic 130°C is used for measuring hot process water in heating systems with high relatively constant flow rates. Available in sizes DN 40 up to DN 300. Approved in DN 50 to DN 150 for customer billing acc. to 2014/32/EU MI004 Installation in vertical, horizontal or inclined pipes Available in short and long body lengths Can be equipped with up to three pulsers (1xOD, 2xRD) For measurement of hot process water up to 130 °C
Jual SENSUS WP-Dynamic DN 50 PN 16 130deg
Jual SENSUS WP-Dynamic DN 50 PN 16 130deg – Flow sensor for heat meters for commercial, and light industrial use DN 50 to 150 for customer billing, For measurement of hot process water up to 130 °C. For high permanent flow rates such as generated by pumps, as well as for the measurement of low flow rates in off-peak periods Installation in horizontal and vertical pipe lines The flow sensor WPD FS 130°C is used for measuring hot process water in heating systems with high relatively constant flow rates. Available in sizes DN 40 up to DN 300. Approved in DN 50 to DN 150 for customer billing acc. to 2014/32/EU MI004 Installation in vertical, horizontal or inclined pipes Available in short and long body lengths Can be equipped with up to three pulsers (1xOD, 2xRD) For measurement of hot process water up to 130 °C
